Sale!

Budget ???? Everbuild Black Jack Self Adhesive Flashing Tape 10m 75mm FLAS75 Box Of 8 ❤️ -West System Shop unnamed file 56

Budget ???? Everbuild Black Jack Self Adhesive Flashing Tape 10m 75mm FLAS75 Box Of 8 ❤️ -West System Shop unnamed file 254

Budget ???? Everbuild Black Jack Self Adhesive Flashing Tape 10m 75mm FLAS75 Box Of 8 ❤️

Original price was: $74.49.Current price is: $53.63.

SKU: FLAS75 Category: Flashing Tape & Primer Tags: 8, Everbuild, Of

7 Days of Hassle-Free Returns
Excellent customer service online in a timely manner
Nature-friendly materials, for a better planet.
Quality that lasts, prices that don't.

Trade Option: Box of 8

Everbuild Flashing Tape 10m x 75mm

MPN: FLAS75

Barcode: 5029347099015

Everbuild 3 inch 75mm Wide Strong self adhesive flashing tape trade Box of 8

Aluminium foil and a bitumen rubber adhesive. The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand or roller.

Benefits:

Replaces need for expensive lead flashing self-adhesive requires no separate glue.

Applications:

General repair to existing flashing.
Flashing bituminous felt and similar types of roofs.
Flashing parapet walls.
Sealing roof glazing.
Replacing lost lead flashing.
Repairs to cracks in concrete.
Repairs to lead gutters.
Sealing capping bolts in roof sheets.
Sealing roof ridges.
Flashing between timber brickwork or blockwork cavities.
Flashing of skylights

Notes

Prime porous surfaces with Everbuild flashing primer.

Do not apply to damp surfaces.

In cold weather adhesion may be reduced.

Bring up to temperature or heat bitumen adhesive layer with a hot air gun to

improve adhesion & pliability.

Preparation:

Surfaces must be dry,

Sound free from oil, grease and dust

Remove all loose material by scraper or wire brush.

Porous surfaces, such as concrete or brick, should be primed using Everbuild flashing tape primer. Awkward areas and tops of existing lead flashing can be pointed using Everbuild Lead mate larger flat areas can be coated with Evercryl Fibre reinforced coating.

Applying:

Cut to the required length.

Peel beck approximately 5cm of release carrier and place the tape into position.

Continue removing the release carrier whilst firmly placing the tape

Avoid unnecessary creasing.

Ensure intimate contact and ensure no air is trapped.

Using a small seam roller ensure that all edges and overlaps are sealed properly.

Overlaps should be at least 25mm.

Everbuild Official Data Sheets:

Black Jack 75mm Flashing Tape Technical Data Sheet

Everbuild Flashing Tape Product Page

All Flashing Tape Products