Best Pirce 🎉 Owatrol Owayell Marine Gelcoat And Metal Renovator Cleaner 1 Litre 👏

Owatrol Marine Gelcoat and Metal Renovator

Product Option: OWAY-1

Barcode: 3285820039448

Size: 1 Litre

Owayell is a gelcoat and metal renovator which removes yellow staining, limescale and rust spots from gelcoat, stainless steel and other surfaces in a matter of minutes.

It will brighten and whiten gel coats as well as dissolve limescale, sea salt and water marks.

Owayell will also disintegrate dirt caused by micro-organisms and barnacle shell residue.

Can be used to restore shine to stainless steel, anodised aluminium and chrome surfaces.

Owayell is simple to use and is fact acting in just 5 to 10 minutes.

It can also be used to passivate raw steel and aluminium in preparation for painting.

Ideal uses of Owayell gelcoat and metal renovator

Brightening a gelcoat with yellow staining Removing barnacle or shell residue from boat hulls Dissolving watermarks and unsightly limescale residue

Removing streaks and rust traces from marine metal Restoring shine and removing rust spots from stainless steel Passivating steel in preparation for painting

This Video Demonstration shows you just how effective this product is:

Good Practice:

Always carry out a preliminary test to determine suitability.

Wear gloves, safety goggles and protective clothing.

Protect surfaces you do not wish to treat.

Do not apply to surfaces in direct sunlight during the hottest hours of the day.

Limit contact time to 5 minutes when applying to paint, varnish, lacquer or non-rusted steel.

Properties:

Removes yellow staining, mould, black stain and rust.

Brightens and whitens gelcoats.

Dissolves limescale, sea salt and water marks.

Cleans and renews anti-slip surfaces.

Disintegrates dirt caused by micro-organisms and barnacle/shell residue.

Removes streaks and rust traces. Passivates steel.

Restores shine to stainless steel (removes rust spots), anodised aluminium and chromes surfaces.

Easy to use and fast acting.

Basic Areas For Use:

Polyester/Gelcoat, Anodised Aluminium, Plexi-glass, Glass, Stainless Steel, Hull, Keel, Propeller Shaft, Decks, Portholes, Pulpits, Stanchions, Cleats, Chocks, Rigging, Masts, Spars.

Application:

Shake well before use.

Do not dilute.

Apply OWAYELL to the surface to be treated allow to work for 5 to 10 minutes 20 Deg C @ 50 % RH.

Theres no need to scrub the surface.

Rinse with plenty of fresh clean water, working from top to bottom.

If required repeat process.

TIP:

For surfaces heavily encrusted with limescale brush surface with nylon brush 10 minutes after applying first application.

DO NOT rinse. Apply 2nd application and leave to work 5 to 10 minutes.

Rinse with plenty of fresh clean water.