Buy ???? Sikaflex Sika 215 Wood & GRP Primer 1 Litre SP215-1L ????

Sika 215 Wood & GRP Primer Large 1 Litre Size

Product Code: SP215-1L

Barcode: 7612894511154

Sika Primer 215 1 Litre is suitable for application to the following substrates:

• plastics such as GRP, epoxy resins, PVC, ABS, various non-metallic substrates, FRP, plywood, timber and wooden fixtures.
• Because plastics vary so much in their chemical composition, preliminary trials are necessary.
• This product must not be used on plastics that are prone to stress cracking such as acrylics or polycarbonates.
• Suitable for experienced professional users only.
• Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Method of Application:

• Apply a thin but covering coat of Sika Primer-215 with a brush or dauber.
• Do not apply at temperatures below 50 deg F or above 95 deg F.
• For application at lower or higher temperatures, consult with Sika Technical Service.
• Allow primer to dry for a minimum of 30 minutes at 73 deg F and 50% relative humidity.
• Ambient temperature and substrate porosity affects drying time.
• Surface should be tack-free before Sikaflex application.

For best results, apply Sikaflex within 2 hours after priming.

Avoid re-priming Sika Primer-215 should be applied once only.

Care must be taken to ensure that this single application gives adequately dense coverage.

Reseal container tightly immediately after use to prevent spoiling.

See All Sikaflex Marine Products